High-performance rubber seal material is AEM (Ethylene Acrylate Rubber). It offers exceptional resistance to heat, oil, and chemicals and is composed of an ethylene and acrylate copolymer.
AEM rubber seals are capable of withstanding temperatures as high as 150°C and work effectively in hot conditions. They can run steadily in surroundings lubricated with oil for an extended period of time and also exhibit good resistance to oil. AEM rubber seals can also resist a wide range of acids, alkalis, and solvents with exceptional chemical resistance.
The AEM X-rings are a high-performance seal made of AEM rubber with excellent high temperature and chemical resistance and wide applicability. Can be used in static or dynamic applications.
Auto parts AEM seals are synthetic rubber materials used to assure normal functioning and prevent leaking of liquid or gas in automobile systems and components. They can tolerate high temperatures, pressure, and chemical exposure and are appropriate for use in fuel, cooling, and hydraulic systems. AEM seals can be used in combination with other sealing materials or components to satisfy specific application demands. They offer outstanding physical qualities and chemical stability. They are resistant to chemicals, can tolerate temperatures as high as 150°C, and can keep systems operating properly. They also prolong system life and efficiency by lowering wear and friction.
이름: AEM 플랜지 개스킷
적용 분야: 플랜지 연결 씰링, 밸브 씰링, 스로틀 장치 씰링, 플레어 조인트 씰링
AEM 플랜지 개스킷은 화학, 석유, 천연가스 및 자동차와 같은 산업 분야에 사용되는 내화학성, 내열성 및 내유성 개스킷 소재로, 고유한 내화학성, 내열성 및 내유성을 자랑합니다. 높은 탄성과 복원력으로 압력 하에서 안정적인 밀봉을 보장하여 안전한 매체 전송과 정상적인 시스템 작동을 보장합니다. AEM 플랜지 개스킷은 물리적 특성과 밀봉 효과를 오랫동안 유지하도록 설계되어 파이프, 용기 및 장비를 연결하는 데 이상적입니다.
Air compressor AEM piston rings refer to a specific type of piston rings used in air compressors. A piston ring is a component located in an engine or compressor piston whose primary function is to seal the combustion chamber or compression chamber.
ACM 개스킷 씰이라고도 하는 ACM 씰은 고무 압축 성형, 사출 성형 및 압출 성형으로 만든 폴리 아크릴레이트 고무 씰입니다. 뜨거운 기름과 산화에 대한 저항성이 뛰어나고, 오존 및 내후성이 우수하며, 복원력이 낮고, 가스 투과성이 우수하며, 산과 알칼리에 대한 저항성이 뛰어납니다. 하지만 내수성이 떨어지고 염기, 산, 습기에 대한 저항성이 약하다는 단점이 있으며 10°C 이하에서는 사용하지 않아야 합니다.
Ethylene acrylic elastomers (AEM) are heat and fluid resistant for flexible applications. Products range from hoses and dampers to seals and gaskets. AEM has good resistance to compression set, but poor resistance to aromatic hydrocarbons, strong acids, and strong bases. AEM is heat resistant up to 150°C and low temperature resistant -29°C to -40°C.
AEM O-rings are copolymers composed of ethylene, methacrylate and vulcanized monomers. It has excellent heat resistance, good oil resistance and chemical properties, and has good compression deformation resistance and low softness and softness. In addition,AEM O-rings have excellent ozone resistance and good weather resistance, with almost no change in appearance and physical properties after 3 years of exposure.
Vamac® 또는 Vamac® 에틸렌 아크릴 엘라스토머 씰링 링으로도 알려진 AEM 씰링 링은 뛰어난 내열성 및 내유성으로 잘 알려진 합성 고무입니다.
AEM Injectors O-rings are a common seal used in automobile engine fuel systems due to their excellent fuel, high temperature, and chemical resistance properties. These seals are certified by SAE, ASTM, ISO 9001, and ISO 14001 standards. AEM Injectors O-rings have super oil resistance, high temperature resistance, good elasticity and recovery, and chemical corrosion resistance. They are suitable for various fuel injection systems, including automotive, aerospace, shipbuilding, and industrial equipment. They prevent fuel leakage, maintain system stability, and prevent wear and damage to components.
High concentrations of acidic media, particularly strong acids such concentrated sulfuric and hydrochloric acids, may not be able to withstand the resistance of AEM rubber seals. AEM rubber seals may corrode or sustain damage as a result of these media.
AEM rubber seals are not very resistant to oxidants, like hydrogen peroxide and high oxygen concentrations. AEM rubber seals may age, deteriorate, or sustain damage as a result of these oxidants.
Certain organic solvents, such ether solvents and ketones, can only be resisted to a limited extent by AEM rubber seals. AEM rubber seals may expand, deform, or fail as a result of these solvents.
In steam conditions with high temperatures and high pressures, AEM rubber seals may show signs of intolerance. High pressure steam at high temperatures can cause AEM rubber seals to stiffen, lose their elasticity, or shatter.
It should be remembered that the media and fields listed above are only typical scenarios; the precise tolerance will also rely on the AEM rubber seal’s formula, usage circumstances, and application environment.
Density: AEM rubber seals have a lower weight and typically have a density of 1.10–1.12 g/cm³.
Hardness: AEM rubber seals can be tailored to meet individual requirements, with a typical range of 60 to 80 Shore A.
Elastic modulus: The elastic modulus of AEM rubber seals is usually between 3-5 MPa, and has good elasticity and recovery.
Heat Resistance: AEM rubber seals can withstand high temperature environments and maintain stable performance during long-term exposure to temperatures up to 150°C.
Oil resistance: AEM rubber seals have good oil resistance and can be used in oily media such as lubricating oil and fuel without damage for a long time.
Chemical Resistance: AEM rubber seals are resistant to a wide range of chemicals, including acids, alkalis, and solvents.
Tensile strength: The tensile strength of AEM rubber seals is usually between 8-12 MPa, which has high strength and durability.
Elongation: The elongation of AEM rubber seals is usually between 200-300%, allowing them to maintain a certain degree of ductility when stretched.
Compression deformation: AEM rubber seals have good compression deformation properties and can maintain a stable sealing effect when under pressure.
Formability: AEM rubber seals have good formability and can be processed by compression molding, extrusion molding and other methods.
Cutability: AEM rubber seals can be processed by cutting, punching, etc. to meet the needs of different shapes and sizes.
Adhesion: AEM rubber seals can be bonded to other materials, such as metal, plastic, etc., to achieve more complex sealing structures.
자동차 산업: AEM rubber seals are widely used in the automotive industry and can be used in key parts such as engine seals, fuel system seals, and hydraulic system seals. It can withstand high temperatures and chemicals, ensuring the reliability and safety of cars in harsh environments.
항공우주 산업: AEM rubber seals are widely used in the aerospace field for key components such as aircraft engine seals, hydraulic system seals, and fuel system seals. Its heat, oil and chemical resistance meets the stringent requirements for high-performance seals in the aerospace industry.
산업용 장비: AEM rubber seals are also suitable for the sealing needs of various industrial equipment, such as chemical equipment, petroleum equipment, hydraulic equipment, etc. It can maintain a stable sealing effect in harsh environments such as high temperature, high pressure and chemical corrosion, ensuring the normal operation and safety of the equipment.
의료 기기: AEM rubber seals are also used in the field of medical devices, such as seals for medical equipment, pharmaceutical packaging seals, etc. Its chemical resistance and hygienic requirements meet the requirements for seals in the medical device field.
The above is a general description of AEM rubber seals. Actual industries and applications will require specific formulations.
Introduction Silicone sealing gaskets stand as indispensable components in numerous industrial applications, playing a pivotal
소개 불소 고무 또는 전체 불소 고무는 저항성이 뛰어난 합성 고무입니다.
오늘날 현대 과학 기술 분야는 빠른 속도로 발전하고 있습니다,
Introduction Piston seals are an essential mechanical component of hydraulic cylinders and other reciprocating motion
1부 기계 작동에서 고무 부품의 역할 고무 부품은 다양한 역할을 합니다.
This comprehensive guide aims to enlighten you about dynamic seals – their functions, types, applications,
카탈로그 살펴보기
린데 제품에 대해 더 자세히 알고 싶으신가요?
언제든지 이메일을 보내주세요:
