Автомобильные индивидуальные пломбы

Name:Automobile engine oil pump oil seals FKM

Application:Automobile Oil pump;Industrial pump; compressor;Hydraulic machinery;Ships and marine equipment;manufacturing equipment

Oil pump oil seals are crucial components in automobile engine oil pumps, preventing lubricating oil leakage and maintaining normal operation. Mechanical seals, made of wear-resistant materials like silicon carbide and tungsten carbide, are the most common type, while O-ring seals use a circular rubber sealing ring. They function by preventing lubricating oil leakage, ensuring proper functioning, long-term durability, and chemical resistance. Mechanical seals use wear-resistant materials for high temperature resistance, while O-ring seals use rubber materials like nitrile rubber or fluoroelastomer for chemical resistance. They should be installed correctly, with appropriate lubricants or sealants used when needed. Regular checks and replacements are necessary to maintain normal operation. Overall, oil pump oil seals are essential for maintaining the oil pump’s proper functioning.

Automobile transmission front axle seal FKM NBR

The automobile transmission front axle seal is a seal at the input end of the front axle in the transmission system, preventing lubricating oil or fluid leakage and preventing external impurities. Made of elastic materials like rubber or silicone, it forms a sealed contact with the transmission system housing. If leakage occurs, it can cause issues like poor lubrication, overheating, and increased wear of parts. Replacing the seal requires disassembly, removal, cleaning, and proper installation methods.

Automatic transmissions

NBR ,FKM,FPM

ISO/TS 16949;IATF 16949;ASTM D2000

Automatic transmissions have multiple seals, including the front axle, rear axle, turbine seal, and shifter seal. The front axle seal seals the gap between the front output shaft and the drive shaft, while the rear axle seal seals the gap between the rear output shaft and the drive shaft. The turbine seal uses an oil-resistant rubber material to seal the gap between the torque converter and transmission. The gear lever seal seals the inlet and outlet of the gear lever and is made of rubber material with good sealing performance and wear resistance.

Автомобильные гидравлические уплотнения

Automotive hydraulic systems rely on seals for optimal operation and sealing performance. These seals are usually rubber or elastomeric materials. Piston seals, rod seals, O-rings, gaskets and shaft seals are important components in hydraulic systems. The piston seal prevents fluid leakage and external impurities from entering the cylinder, while the rod seal provides reliable sealing during rod movement. O-rings are used in connectors, valves and pumps, while gaskets are used in fittings and flanges. The shaft seal ensures reliable sealing when the shaft rotates.

Automotive ignition system rubber components

Rubber seals are commonly used on automotive ignition system components to ensure a tight seal between ignition coils, spark plugs and ignition switches. The ignition coil converts the battery’s low voltage into a high voltage, igniting the vehicle’s fuel mixture. The spark plug delivers electricity to the combustion chamber, and a rubber seal may be used on the part that contacts the cylinder head to prevent gas leakage. The ignition switch controls your car’s ignition and shutdown, and rubber seals are used to protect the inside of the switch from dust, moisture, and other contaminants. Rubber seals also prevent moisture, dust and impurities from entering the ignition system, making it shock and vibration resistant. They also form an insulating layer around the ignition coil, preventing current leakage or interference. Rubber seals are typically made from oil-, heat-, and chemical-resistant rubber materials, and their size and shape vary depending on the design and installation requirements of the ignition coil.

Made from high-quality rubber materials, Automotive rubber door seal offer exceptional durability and resistance to wear, tear, and harsh environmental conditions. One of the primary applications of car seals rubber rings is in the automotive industry, where they are extensively utilized in engines, transmissions, fuel systems, and other crucial components.

Уплотнительные кольца с двойной втулкой

Автомобильный гидравлический цилиндр двойной клапан втулка уплотнительное кольцо

Автомобильный клапан подвески двойной клапан втулка уплотнительное кольцо

Гидравлический усилитель рулевого управления с кольцевым уплотнением гильзы двойного клапана

Уплотнительные кольца с двойной втулкой являются важнейшими компонентами гидравлических и пневматических систем, обеспечивая правильную работу системы за счет уплотнения втулки между канавками в корпусе клапана. Изготовленные из таких резиновых материалов, как нитрильный каучук (NBR), фторэластомер (FKM) или силиконовый каучук (VMQ), эти уплотнительные кольца устойчивы к воздействию масел, температур и химических веществ. Размер и форма уплотнительного кольца подбираются в соответствии с размером гильзы и корпуса клапана, обеспечивая правильную деформацию при сжатии и герметичность. Регулярное техническое обслуживание и замена имеют решающее значение для надежности и безопасности системы.

Уплотнительная лента обеспечивает защиту от пыли, звукоизоляцию, теплоизоляцию, теплопоглощение, гидроизоляцию, сверхэластичность, увеличенный срок службы и устойчивость к анингу, и все это по разумной цене. Наша уплотнительная лента может быть изготовлена по индивидуальному заказу в соответствии с вашими потребностями.

MAF Air Flow Meter Sensor Rubber Kit

MAF Air Flow Meter Sensor Rubber Kit is a protective and sealing component designed to protect the sensor from external damage. It’s made from high-temperature, chemically stable rubber material that protects against bumps, shocks and vibrations. A rubber boot seals the sensor to ensure accuracy and reliability.